Dry Fluorescence Immunoassay Analyzer(ZOS-F2100) Simple Operation
Instructions
parameter
| Hardware configuration | CPU: i MX6;Memory:1GB |
| Display card | Support for a 1080p resolution |
| Hard disk space | 8GB |
| Security software | No |
| Network conditions | Network port |
| Network operation environment | LAN |
| Printing system | Built-in thermal printer |
| Data processing | Supports LIS connection transfer test results and data import |
| Excitation light source | LED |
| Sample type | Whole blood, serum, plasma and urine |
| Sample management | Automatically identify the test items. The test results are timely
output and transmitted |
| Power parameters | Host input——24V,9.2A;Adapter input——AC 220V,50Hz |
| Input power | 220V |
| Number of tests | Channel 20 (supports multi-item simultaneous testing, independent
timing) |
Simple operation instructions
1. Click "Scan the QR code", point the QR code card at the QR code
scanner (about 10cm), read the project information, the interface
prompts "Information Entry Complete", and click "End Entry".
Notes:
(1) Different items, the two-dimensional code card can not be
cross-scanned.
(2) The same items, different batches, the QR code card can not be
cross-scanned.
2.Enter the tested information, select the sample type, and click
OK.
Off-machine mode: refers to the measured sample reagent card that
is incubated externally after adding the sample, and puts the
reagent card into the instrument for the sample result analysis.
3.Add sample: absorb samples, add buffer and mix well.
Use the sample sample gun to add the absorbed sample to the reagent
card according to the reagent instructions.
4. Test: put the reagent card into the instrument reagent bayonet,
the instrument automatically identifies the test items, and
conducts the countdown test.
Matters needing attention:
(1) Please ensure that the reagent card is in place.
(2) When the cab door is closed, do not add samples or tests.
(3) Do not add samples or test when the channel countdown on the
instrument interface is less than 20 seconds.
(4) Don't try to prevent the door from closing.
(5) Clean the reagent card in the waste bin in time to prevent the
instrument from losing the reagent card normally.
Product features:
| Large capacitive contact screen | 10.1 " full touch screen control sensitive operation |
| Enrich the peripheral interfaces | HIS/LIS and external printer |
| Project automatic identification | Reagent test items are obtained automatically |
| Intelligent Android system | Better user operation experience |
| The results print automatically | The built-in thermal printer results print automatically |
| Centralized processing of the waste card | The original waste card processing warehouse is clean and
convenient |
| Scan the code to automatically input | Standard calibration information QR code input is convenient and
fast |
| Many | Up to 20 test channels enable batch testing for continuous
detection of all channels to support emergency measurements |
| Fast | In the external mode, the detection results can be obtained after 5
seconds, and the fastest incubation time in the machine is 3
minutes |
| Quasi | The detection accuracy of the 24-bit signal acquisition chip of the
patented optical detection system is greatly improved |
| Stable | Built-in ultra-stable incubation and detection system to completely
solve the result deviation caused by the temperature difference |
Company profile
