ZOS-F2100(Multi-Channel)
parameter
| CPU: | i MX6 |
| Resolution ratio | 1080p |
| Hard disk space | 8GB |
| Memory | 1GB |
| Network conditions | Network port |
| Network operation environment | LAN network |
| Printing system | Built in thermal printer |
| Data processing | Support LIS connection transfer test results and data import |
| Excitation light source | LED |
| Sample type | Whole blood, serum, plasma and urine |
| Sample management | Automatically identify test items. Timely output and transmission
of test results |
| Power parameters | Host input——24V,9.2A;Adapter input——AC 220V,50Hz |
| Input power | 220V |
| Number of tests | 20 channels (support multi project simultaneous test, independent
timing) |
Simple operation instructions
1. Click "scan QR code" and align the QR code card with the QR code
scanner (about 10 cm) to read the project information The interface
prompts "information entry completed", and click "end entry".
matters needing attention:
(1) Different projects, two-dimensional code card can not cross
scan.
(2) The same project, different batches, two-dimensional code card
can not cross scan.
2. Input the information of the tested person, select the sample
type and click "confirm"
External mode: refers to the test sample reagent card after the
completion of the external incubation, to be incubated After that,
put the reagent card into the instrument to analyze the sample
results.
3. Sample addition: absorb the sample, add it to the buffer, and
mix well.
Add the mixed sample to the reagent card with the sampling gun
according to the reagent instructions.
4. Test: put the reagent card into the reagent bayonet of the
instrument, and the instrument will automatically identify the test
items and conduct the countdown test.
matters needing attention:
(1) Make sure the reagent card is in place.
(2) When the cabin door is closed, do not add samples or test.
(3) When the countdown of a channel on the instrument interface is
less than 20 seconds, do not add samples or test.
(4) Do not attempt to prevent the door from closing.
(5) Clean the reagent card in the waste box in time to prevent the
instrument from losing the card normally
Product features
| Large capacitance touch screen, 10.1 inch full touch screen,
sensitive control, easy operation |
| Rich peripheral interface can connect his / LIS and external
printer. |
| Automatic identification of items automatic acquisition of reagent
test items |
| Better user experience of smart Android system |
| Results automatic printing, built-in thermal printer, automatic
printing results |
| Scan code to input calibration information automatically, QR code
input is convenient and fast |
| Waste card centralized processing, original waste card processing
warehouse, clean and convenient |
| Up to 20 test channels are used for batch test and continuous
detection. All channels support emergency measurement |
| In the outdoor mode, enter the machine to test for 5 seconds and
get the results. The fastest incubation time in the machine is 3
minutes |
| The detection accuracy of 24 bit signal acquisition chip of patent
optical detection system is greatly improved |
| Built in super stable incubation and detection system, completely
solve the result deviation caused by temperature difference |
Company profile
