Disposable Vacuum Blood Collection Container Matters Needing
Attention
Structure composition
The disposable vacuum blood collection container consists of a test
tube, a plug, a cap, a label, additives (if any) and additives (if
any).
Additive
Sodium citrate 9:1, Sodium citrate 4:1, Heparin sodium, Liheparin
opening, Liheparin Lin/separation glue coagulation/separation glue,
curing accelerator, EDTAK2 heparin sodium/sodium fluoride, EDTAK2 /
separation adhesive, EDTAK3 EDTAK3 / separation adhesive, Heparin
sodium/separation adhesive, no addition
Scope of application
Used in conjunction with disposable intravenous needles for the
collection, transportation and preservation of human venous blood.
Identification of blood vessels and additives
| The appropriate vascular type was selected according to the purpose
of routine laboratory tests |
| Types of additives | Additive code | Recommended colors |
| No additives | Z | red |
| Accelerator | None | Red/orange |
| Separation gel / accelerator | None | yellow |
| Heparin lithium | LH | green |
| Heparin sodium | NH | green |
| Heparin lithium / separation gel | None | green |
| Edtak3 / separator | None | violet |
| Heparin sodium / separation gel | None | green |
| EDTAK2 / separator | None | violet |
| Sodium citrate 9:1 | 9NC | wathet |
| Sodium fluoride / heparin sodium | FH | grey |
| EDTAK2 | K2E | violet |
| EDTAK3 | K3E | violet |
| Sodium citrate 4:1 | 4NC | black |
1. Select the venipuncture site below the reaper's arm, affix the
blood collection tape, and then disinfect.
2. Loosen the sheath of the blood collection needle, put the blood
cap of the blood collection vessel up, arm down, and enter the
vein.
3. The other end penetrates the diaphragm of the rubber plug to
prevent side penetration and early loss of floating pressure.
4. After the blood enters the blood collection container, the blood
collection belt should be untied immediately. After blood
collection, the needle was pulled out from the vein, and the
puncture site was compressed with disinfectant to stop the
bleeding.
5. After blood collection, turn over the sampler and shake it
evenly 5 times. Observation site.
6. After use, please put the disposable vacuum blood collection
container into the special recovery machine.
Storage requirements
Store in a dry, well-ventilated and clean room with no corrosive
gas and relative humidity above 80%
matters needing attention
1. This product is disposable.
2. Do not use when the tube body is damaged or the plug is loose.
3. After blood collection, the vacuum sampling vessel with
anticoagulant should be mixed 5-8 times in reverse to ensure the
complete fusion of anticoagulant and blood sample.
4. After blood collection, erect the vacuum sampling container with
coagulant or separation glue. Wait until the blood is completely
coagulated, then centrifuge the serum.
5. Special vacuum sampling vessels are used at high altitudes.
6. Products should only be used by trained medical personnel in
accordance with the relevant operating procedures of the medical
department.
Company Profile
Zhongxiu Science And Technology Co.,Ltd., is a high-tech enterprise
engaged in the research and development, production and operation
of in vitro diagnostic products. The in vitro diagnostic products
developed by the company cover POCT series, microbial series,
biochemical series and immune series reagents and supporting
instruments.
The company has always adhered to the core concept of "fast and
accurate, living up to life", committed to providing society with
excellent products and services, and contributing to the cause of
human health.
