Dry Fluorescence Immunoassay Analyzer(ZOS-F2100) Product Features
parameter
| Hardware configuration | CPU: i MX6;Memory:1GB |
| Display card | Support a resolution of 1080p |
| Hard disk space | 8GB |
| Security software | No |
| Network conditions | Network port |
| Network operation environment | LAN |
| Printing system | Built-in thermal printer |
| Data processing | Support LIS connection to transmit test results and import data |
| Excitation light source | LED |
| Sample type | Whole blood, serum, plasma and urine |
| Sample management | Automatically identify test items. Test results are output and
transmitted in time |
| Power parameters | Host input——24V,9.2A;Adapter input——AC 220V,50Hz |
| Input power | 220V |
| Number of tests | Channel 20 (supports multiple simultaneous tests and independent
timing) |
Simple operation instructions
1. Click "Scan QR code", point the QR code to the QR code scanner
(about 10cm), read the project information, and the interface
prompts "Information input is complete", and click "End input".
Note:
(1) for different items, the two-dimensional code card cannot be
cross-scanned.
(2) For the same item and different batches, the two-dimensional
code cannot be cross scanned.
2. Enter the test information, select the sample type, and then
click OK.
Ex-factory mode: refers to the reagent card of the actually
measured sample incubated outside after adding the sample, and the
reagent card is put into the instrument for sample result analysis.
3. Add sample: absorb the sample, add buffer solution, and stir
evenly.
Use the sample gun to add the absorbed sample to the reagent card.
4. Test: put the reagent card into the reagent bayonet of the
instrument, and the instrument will automatically identify the test
items and carry out countdown test.
Matters needing attention:
(1) Please ensure that the reagent card is in place.
(2) When the cab door is closed, do not add samples or tests.
(3) When the channel countdown on the instrument interface is less
than 20 seconds, do not add samples or tests.
(4) Don't try to stop the door from closing.
(5) Clear the reagent cards in the trash can in time to prevent the
instrument from losing the reagent cards normally.
Product features:
| Larger capacitive touch screen | 10.1 "full touch screen control sensitive operation |
| Enrich peripheral interface | HIS/LIS and external printer |
| Automatic project identification | The reagent test items can be obtained automatically |
| Intelligent Android system | Better user experience |
| Test results will be printed automatically | The printed results of the built-in thermal printer will be printed
automatically |
| Centralized card processing | The original waste card processing warehouse is clean and
convenient |
| Scan code for automatic input | Two-dimensional code input of standard calibration information is
convenient and quick |
| Many | Up to 20 test channels allow batch testing to continuously test all
channels to support emergency measurement |
| Fast | In external mode, the detection results can be obtained after 5
seconds, and the fastest latency time in the machine is 3 minutes |
| Quasi | Greatly improved the detection accuracy of the 24-bit signal
acquisition chip of the patent optical detection system |
| Stable | Built-in super-stable incubation detection system completely solves
the result deviation caused by temperature difference |
Company profile
