Dry Fluorescence Immunoassay Analyzer(ZOS-F2100) Parameter
Parameter
| Hardware configuration | CPU: i MX6;Memory:1GB |
| Display card | Support 1080p resolution |
| Hard disk space | 8GB |
| Security software | No |
| Network conditions | Network port |
| Network operation environment | LAN |
| Printing system | Built in thermal printer |
| Data processing | Support LIS connection to transmit test results and import data |
| Excitation light source | LED |
| Sample type | Whole blood, serum, plasma and urine |
| Sample management | Automatically identify test items. The detection results are output
and transmitted in time |
| Power parameters | Host input——24V,9.2A;Adapter input——AC 220V,50Hz |
| Input power | 220V |
| Number of tests | 20 channels (supporting simultaneous testing of multiple projects
and independent timing) |
Simple operation instructions
1. click "scan two-dimensional code", aim the two-dimensional code
card at the two-dimensional code scanner (about 10cm) to read the
project information, and the interface prompts "information entry
is complete", and then click "end entry".
Matters needing attention:
(1) for different items, the two-dimensional code card cannot be
cross-scanned.
(2) Two-dimensional code cards with the same item and different
batches cannot be cross-scanned.
2.Enter the information of the examinee, select the sample type,
and click "OK".
Out-of-machine mode: means that the reagent card of the tested
sample is incubated outside after adding the sample, and the
reagent card is put into the instrument for sample result analysis
after the incubation is completed.
3.Sample addition: suck the sample, add it into the buffer
solution, and mix well.
Use the sample adding gun to add the absorbed and mixed sample to
the reagent card according to the reagent instructions.
4. Test: put the reagent card into the reagent bayonet of the
instrument, and the instrument will automatically identify the test
items and carry out countdown test.
Matters needing attention:
(1) ensure that the reagent card is put in place.
(2) Do not add samples or test when the door is closed.
(3) When the countdown of a channel in the instrument interface is
less than 20 seconds, do not add samples or test.
(4) Do not attempt to obstruct the door from closing.
(5) Clean up the reagent cards in the waste box in time, so as not
to hinder the normal loss of cards.
Product features:
| Super capacitance touch screen | The 10.1-inch full touch screen is sensitive to control and easy to
operate |
| Enrich peripheral interface | Can dock HIS/LIS and external printer, etc |
| Automatic project identification | Automatic acquisition of reagent detection items |
| Intelligent Android system | Better user experience. |
| Automatic printing of results | Automatic printing of results with built-in thermal printer |
| Centralized treatment of waste cards | The original waste card processing warehouse is clean and
convenient |
| Scan code automatic entry | Two-dimensional code entry of calibration information is convenient
and quick |
| Many | Up to 20 test channels can realize batch testing and continuous
testing. All channels support emergency measurement |
| Fast | In external mode, the test results can be obtained after 5 seconds,
and the fastest incubation time in the machine is 3 minutes |
| Quasi | The detection accuracy of 24-bit signal acquisition chip of
patented optical detection system has been greatly improved |
| Stable | Built-in super-stable incubation and detection system completely
solves the result deviation caused by temperature difference |
Company profile
