Disposable Venous Blood Sampling Needle Product Structure And
Composition
Product Structure And Composition
Type I is a flexible venous blood collection needle composed of a
needle tube protective cover, a blood collection needle tube, a
needle handle (single or double wings), a tube, a needle holder, a
cork puncture needle, and a puncture needle protection cover. Type
II straight needle vein The lancet is composed of a puncture needle
housing, a puncture needle protective cover, a cork puncture
needle, a needle seat, a lancet tube, and a needle tube protective
cover
Scope Of Application
Matching disposable venous blood sample collection container for
human body venous blood sample collection
Usage Method
1. Lig the tourniquet with moderate elasticity at the shoulders and
elbows. (The tourniquet is too loose and the pressure is not
enough, and the tourniquet is too tight or too low to cause
hematoma at the puncture site).
2. Disinfect the skin from the inside to the outside of the
puncture site.
3. Choose a suitable disposable venous blood collection needle, and
perform puncture after the disinfectant is naturally dried. During
puncture, fix the patient’s upper arm with the left hand, and
quickly insert the needle at an incline of 15-30°. After entering
the blood vessel, place the blood collection needle on the side of
the test tube. The rubber stopper pierced into the test tube, due
to the negative pressure in the blood collection tube, blood can
automatically flow into the blood collection tube. If multiple
tubes are required for blood collection, please try to collect
blood in the following order: red tube (yellow tube), blue tube,
black tube, Green tube, purple tube, gray tube, so as not to affect
the test results.
4. After the blood collection is completed, pull out the blood
collection tube, gently press the blood collection point with a
cotton swab or cotton ball, and quickly pull out the needle, let
the patient press to stop the bleeding for 10 minutes, until no
bleeding, and quickly turn the test tube containing the additive
upside down and mix well. 5- 6 times (try upside down and mix as
soon as possible when collecting blood)
5. Put the used single-use venous blood sampling needle in the
special recovery device.
Matters Needing Attention
1. This product contains plasticizer DEHP, which is for one-time
use. The sterilization method is ethylene oxide sterilization. The
product is valid for two years. It is forbidden to use it when the
package is broken or the validity period has expired.
2. The use of the product must comply with the requirements of the
relevant operating specifications and relevant regulations of the
medical department.
3. In general, unfavorable phenomena such as redness and swelling
at the blood collection site will not occur during use. If you find
this phenomenon, please contact your doctor for treatment in time.
4. This product is only for professional medical staff, and the
cork puncture needle should not be used more than 5 times.
5. After use, the venous blood collection needle should not be
discarded casually, and placed in a special recycling device.
6. Please be alert at all times when using venous blood collection
needles to avoid accidentally injuring yourself or others.
7. The medium package is 100 pcs/bag.
Keep In Storage
It should be stored in a non-corrosive, cool, dry, well-ventilated
and clean environment.
Company Profile
Zhongxiu Science And Technology Co.,Ltd., is a high-tech enterprise
engaged in the research and development, production and operation
of in vitro diagnostic products. The in vitro diagnostic products
developed by the company cover POCT series, microbial series,
biochemical series and immune series reagents and supporting
instruments.
The company has always adhered to the core concept of "fast and
accurate, living up to life", committed to providing society with
excellent products and services, and contributing to the cause of
human health.
