Dry Fluorescence Immunoassay Analyzer (ZOS-F1100) Simple Operation
Instructions
parameter
| hardware configuration | CPU: i MX6；Memory:1GB |
| Hard disk space | 8GB |
| Resolution ratio | Lower than 1080p |
| Network conditions | Network port |
| Network operation environment | LAN network |
| Printing system | Built-in thermal printer |
| Data processing | Support LIS connection to transmit test results and import data |
| Excitation light source | LED |
| Sample management | Automatically identify test items. Output and transmit test results
in time |
| weight | 3kg |
| Input power | 60VA |
| Adapter input | AC 220V,50Hz |
| Host input | DC 12V,5A |
Simple operation instructions
1. Click "scan QR code" and align the QR code card with the QR code
scanner (about 10cm) to read the item information
Matters needing attention:
(1) for different items, the two-dimensional code card cannot be
cross-scanned.
(2) Two-dimensional code cards with the same item and different
batches cannot be cross-scanned.
2. Enter the information of the subject, and select the sample type
and reaction mode.
Note:
A) Off-machine mode: means that the reagent card of the tested
sample is incubated outside after adding the sample, and the
reagent card is put into the instrument for sample result analysis
after the incubation is completed.
B) In-machine mode: the tested sample reagent card is directly put
into the instrument for incubation, and the instrument
automatically analyzes the sample results after incubation.
3. Sample addition: suck the sample, add it into the buffer
solution, and mix well.
Use the sample adding gun to add the absorbed and mixed sample to
the reagent card according to the reagent instructions.
4. Test: put the barcode end of the reagent card into the reagent
bayonet, click "Start Test", and the instrument will automatically
identify the test items and carry out countdown test.
Matters needing attention:
(1) Ensure that the reagent card is put in place. When resistance
and mechanical noise are felt when the reagent card is put in, it
means that the reagent card has been put in place.
(2) After the reagent card is put into the instrument, it must not
be taken out by force. To take out the reagent card, click "Return
Card".
Product features
| It is convenient and quick to input calibration information by QR
code |
| Built-in thermal printer to automatically print results |
| More sensitive control and more convenient operation |
| Better user experience |
| It can be connected with HIS/LIS and external printer. |
| Support internal and external test modes |
Company profile
