Disposable Vacuum Blood Collection Container Identification Of
Blood Vessels And Additives
Structure composition
The disposable vacuum blood collection container consists of a test
tube, a plug, a lid, a label, and additives (if any) and additions
(if any)
Additive
Sodium citrate 9:1, Sodium citrate 4:1, Heparin sodium, lithium
heparin, lithium heparin/separation glue, coagulant/separation
glue, coagulant promoter, EDTAK2, heparin sodium/sodium fluoride,
EDTAK2/ separation glue, EDTAK3, EDTAK3/ separation glue, heparin
sodium/separation glue, no additives
Scope of application
Used together with disposable venous needle, it is used for the
collection, transportation and storage of human venous blood
Identification of blood vessels and additives
| According to the daily purpose of laboratory testing, select the
appropriate type of blood vessels |
| Types of additives | Additive code | Recommended colors |
| No additives | Z | red |
| Accelerator | None | Red/orange |
| Separation gel / accelerator | None | yellow |
| Heparin lithium | LH | green |
| Heparin sodium | NH | green |
| Heparin lithium / separation gel | None | green |
| Edtak3 / separator | None | violet |
| Heparin sodium / separation gel | None | green |
| EDTAK2 / separator | None | violet |
| Sodium citrate 9:1 | 9NC | wathet |
| Sodium fluoride / heparin sodium | FH | grey |
| EDTAK2 | K2E | violet |
| EDTAK3 | K3E | violet |
| Sodium citrate 4:1 | 4NC | black |
1. Select the venipuncture site from the downward position of the
sampled person's arm, apply the blood collection tape, and conduct
disinfection on the venipuncture site;
2. Unscrew the sheath of the blood collection needle, and puncture
the vein with the arm down and the cap of the collection tube up;
3. The other end penetrates the diaphragm of the rubber plug to
prevent side penetration and avoid premature loss of negative
pressure.
4. Once the blood enters the blood collection vessel, the blood
collection belt should be released immediately. After the
collection is completed, the blood collection needle should be
extracted from the vein, and the puncture site should be compressed
with disinfection products to stop the bleeding.
5. Once the blood collection is completed, reverse the sampler and
shake it evenly for 5 times; Place for observation.
6. Place the disposable vacuum blood collection container in the
special recycling appliance after use.
Storage requirements
Store in a dry, well-ventilated and clean room with no corrosive
gas and relative humidity above 80%
matters needing attention
1. This product is disposable;
2. If it is found that the tube body is damaged or the plug is
loose, it is prohibited to use it;
3. The vacuum sampling vessel containing anticoagulant should be
mixed 5-8 times reversed after blood collection to ensure the
complete fusion of anticoagulant and blood sample;
4. The vacuum sampling vessel containing coagulant or separation
gel is placed upright after blood collection, and the serum is
separated by centrifugation after the blood is completely
coagulated.
5. For high altitude areas, please use special vacuum sampling
vessels for high altitude areas;
6. The product should be used in accordance with the relevant
operating specifications of the medical department, and is only
used by trained medical personnel.
Company Profile
Zhongxiu Science And Technology Co.,Ltd., is a high-tech enterprise
engaged in the research and development, production and operation
of in vitro diagnostic products. The in vitro diagnostic products
developed by the company cover POCT series, microbial series,
biochemical series and immune series reagents and supporting
instruments.
The company has always adhered to the core concept of "fast and
accurate, living up to life", committed to providing society with
excellent products and services, and contributing to the cause of
human health.
